My Site Preloader
menu

3rd Gen Dodge Ram Front Hitch Bumper Kit

Dodge Ram 1500 and 1500 Classic

Dodge

Dodge Dodge Ram 1500 and 1500 Classic CO65283

ID product: 1623

NZD$ 1,195.98

Choose
your variation

  • Body Lift Adjustment (NOT suspension lift)
      Choose an option
    • 1" Body Lift

      The 1" body lift option is only for if you have a 1" body lift installed on your vehicle. If you have any type of suspension lift (coilovers, new shocks and coils, spacer lifts, leveling kits, etc) you will want to select the "no body lift" option.

      Price: + NZD$ 42.00

    • 1.5" Body Lift

      The 1.5" body lift option is only for if you have a 1.5" body lift installed on your vehicle. If you have any type of suspension lift (coilovers, new shocks and coils, spacer lifts, leveling kits, etc) you will want to select the "no body lift" option.

      Price: + NZD$ 59.06

    • 2" Body Lift

      The 2" body lift option is only for if you have a 2" body lift installed on your vehicle. If you have any type of suspension lift (coilovers, new shocks and coils, spacer lifts, leveling kits, etc) you will want to select the "no body lift" option.

      Price: + NZD$ 85.31

    • 3" Body Lift

      The 3" body lift option is only for if you have a 3" body lift installed on your vehicle. If you have any type of suspension lift (coilovers, new shocks and coils, spacer lifts, leveling kits, etc) you will want to select the "no body lift" option.

      Price: + NZD$ 111.56

  • Cree LED Lights
      Choose an option
    • Two 24W Cree LED Pod Lights

      Includes two 24W 2300 Lumen CREE LED Lights with a spot/flood combo beam pattern and great adjustability. Simply splice them into your existing factory fog light wiring for an easy install that keeps your factory fog light switch

      Price: + NZD$ 115.50

    • Two 40W Cree LED Pod Lights

      Includes two 40W 3800 Lumen CREE LED Lights with a spot beam pattern and great adjustability. Simply splice them into your existing factory fog light wiring for an easy install that keeps your factory fog light switch

      Price: + NZD$ 156.19

    • Two 24W Cree LED Pod Lights with Full Wiring Harness and Switch

      Includes two 24W 2300 Lumen CREE LED Lights with a spot/flood combo beam pattern and great adjustability. Includes full wiring harness with switch, relay and industry-standard DT connectors

      Price: + NZD$ 164.06

    • Four 24W Cree LED Pod Lights

      Includes four 24W 2300 Lumen CREE LED Lights with a spot/flood combo beam pattern and great adjustability. Simply splice them into your existing factory fog light wiring for an easy install that keeps your factory fog light switch

      Price: + NZD$ 196.88

    • Two 40W Cree LED Pod Lights with Full Wiring Harness and Switch

      Includes two 40W 3800 Lumen CREE LED Lights with a spot beam pattern and great adjustability. Includes full wiring harness with switch, relay and industry-standard DT connectors

      Price: + NZD$ 207.38

    • Four 24W Cree LED Pod Lights with Full Wiring Harness and Switch

      Includes four 24W 2300 Lumen CREE LED Lights with a spot/flood combo beam pattern and great adjustability. Includes full wiring harness with switch, relay and industry-standard DT connectors

      Price: + NZD$ 275.63

    • Four 40W Cree LED Pod Lights

      Includes four 40W 3800 Lumen CREE LED Lights with a spot beam pattern and great adjustability. Simply splice them into your existing factory fog light wiring for an easy install that keeps your factory fog light switch

      Price: + NZD$ 275.63

    • Four 40W Cree LED Pod Lights with Full Wiring Harness and Switch

      Includes four 40W 3800 Lumen CREE LED Lights with a spot beam pattern and great adjustability. Includes full wiring harness with switch, relay and industry-standard DT connectors

      Price: + NZD$ 358.31

  • Material
      Choose an option
    • Steel

      Our steel bumpers are constructed out of 3/16” thick P&O hot rolled steel, NOT cheaper mild steel. Compared to aluminum, steel provides high strength and durability and is easier to weld. It also comes in at a pricepoint much lower than aluminum

      Price: + NZD$ 0.00

    • Aluminum

      Our aluminum bumpers are constructed out of ¼” thick 5052 aluminum. Aluminum provides great corrosion resistance and substantial weight savings over steel. While it is still very strong and durable, it will sustain dents and scratches easier than steel if you like to play hard in the rocks

      Price: + NZD$ 1,437.19

  • Tubing
      Choose an option
    • No

      This gives you a clean, flat-top plate bumper with no tubing hoops in front of the grill or headlights.

      Price: + NZD$ 0.00

    • Low Profile Grill Bar

      This gives you a wide and low single tubing hoop in front of your grill. Ideal for mounting extra lights. Leave a note in the order comments if you'd like us to throw in some extra light tabs free of charge :)

      Price: + NZD$ 136.50

    • Full Height Grill and Headlight Tubing

      This gives you 3 tubing hoops that go in front of the grill and the headlights. To go along with this option, round holes will be pre-cut into your plate bumper top plates for the headlight hoops to pass through. This makes for easier fitment and the ability to weld the tubing to the top and bottom surfaces of your bumper’s side wings for maximum strength. This option gives your vehicle the maximum level of protection from trail obstacles and animal strikes.

      Price: + NZD$ 328.13

  • Model Year
  • Model
  • 3/4" Recovery Shackle (Pair)
      Choose an option
    • No

      Omits the pair of 3/4" recovery shackles. Your bumper will still come with built in attachment points for the recovery shackles of your choice.

      Price: + NZD$ 0.00

    • Yes

      Adds a pair of 3/4" Recovery shackles. These shackles have a 7/8" diameter pin, black powder coat finish, and rubber isolators to eliminate noise and protect your other recovery equipment

      Price: + NZD$ 51.19

I am interested
description

This is a high clearance DIY weld-together bumper kit for the 3rd generation (2002-2008) Dodge Ram (Diesel and Gasoline). It features a low profile design, fully bolt-on construction, integrated 2" hitch receiver and the best approach angle on the market. The high clearance design makes your Ram look more aggressive by showing off your front suspension and tires. In addition, this bumper frees up a ton of space in your front wheel wells and allows you to run 37" tires without any bumper interference! This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Ram. It offers excellent protection from rocks, trees and animal strikes and has been kept to a very reasonable weight of 94lbs (or 47lbs in aluminum) through careful design work. This means less stress on your suspension and drivetrain components.


This bumper mounts to the inner and outer faces of the vehicle's main frame rails for excellent vehicle protection and pulling strength. This mounting system distributes impact and hitch forces evenly across your frame and makes for the stiffest mounting interface of any bumper on the market. This bumper also uses a low profile design that tucks tightly to the body and slopes up directly from the end of the frame. This results in maximum ground clearance and approach angles that will let you take lines on the trail that weren't previously possible.

In addition to the front hitch receiver, this bumper comes with 4 locations to mount 3x3" surface mount LED pod lights as well as a center cut out sized to fit all 30" single row light bars. All of these lighting mounts come with slotted mounting tabs that give a ton of adjustability to fit a wide range of different lights.

The recovery points are recessed into the bumper and placed as close as possible to the front of each frame rail. This directs pulling forces into the frame and eliminates the leveraging effect that traditional recovery points can put on the bumper and frame due to how far away they are from the frame. The way that our recovery points are situated makes them much stronger than their thickness may suggest. And since they are recessed, they eliminate the catching points that traditional recovery lugs can become.

  • DIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included)

  • Low profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2" from the center of the grill!

  • Fits 1500, 2500 and 3500 Diesel and Gasoline Dodge Rams from 2002-2008.

  • Heavy duty 3/16" plate steel construction for maximum offroad strength and durability

  • Optional 1/4" 5052 aluminum for a lightweight yet very durable overlanding setup (47lb weight savings)

  • Bolts directly to frame using a total of 8 factory mounting points - no drilling required

  • Integrated 2" Hitch Receiver provides options for mounting an external winch tray or other hitch accessories

  • Integrated 9/16" thick clevis mounts maximize clearance and allow the use of ¾” D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles

  • Four Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit just about any 3x3 surface mount pod light

  • 30" Single Row Light bar cut out - slotted mounting tabs included

  • Pre-drilled to mount front license plate

  • Optional heavy duty grill and headlight tubing for added protection



Read more
additionnal information
Body Lift Adjustment (NOT suspension lift)
None | 1" Body Lift | 1.5" Body Lift | 2" Body Lift | 3" Body Lift
Cree LED Lights
None | Two 24W Cree LED Pod Lights | Two 40W Cree LED Pod Lights | Two 24W Cree LED Pod Lights with Full Wiring Harness and Switch | Four 24W Cree LED Pod Lights | Two 40W Cree LED Pod Lights with Full Wiring Harness and Switch | Four 24W Cree LED Pod Lights with Full Wiring Harness and Switch | Four 40W Cree LED Pod Lights | Four 40W Cree LED Pod Lights with Full Wiring Harness and Switch
Material
Aluminum (+1095) | Steel
Tubing
Low Profile Grill Bar (+104) | Full Height Grill and Headlight Tubing(+250) | No
Model Year
2006-2008 | 2002-2005
Model
1500 | 2500/3500
3/4" Recovery Shackle (Pair)
No | Yes
bumper weight

Steel base bumper weight: 94lbs

Aluminum base bumper weight: 47 lbs

  • User Review David Beaudet

    Purchased a high clearance bumper kit for my son’s 2nd generation Tacoma. He had almost zero welding experience and thought this would be a great cras...

  • User Review Phillip Miller (ZomBud)

    Fantastic bumper, even for a novice welder. I really liked how all the pieces just fit together, and the locating tabs were also a big help. The one i...

  • User Review Gerry B

    The small shop that can AND DOES!!! A project type that always has challenges and no surprise I did. Bandon and the Coastal Offroad team were extrem...

  • User Review Eric T

    This company is top notch! They were fast and communicated throughout the whole process. The kit was perfect too… very happy with whole package and it...

  • User Profil David Beaudet

    Purchased a high clearance bumper kit for my son’s 2nd generation Tacoma. He had almost zero welding experience and thought this would be a great cras...

  • User Profil Phillip Miller (ZomBud)

    Fantastic bumper, even for a novice welder. I really liked how all the pieces just fit together, and the locating tabs were also a big help. The one i...

  • User Profil Gerry B

    The small shop that can AND DOES!!! A project type that always has challenges and no surprise I did. Bandon and the Coastal Offroad team were extrem...

  • User Profil Eric T

    This company is top notch! They were fast and communicated throughout the whole process. The kit was perfect too… very happy with whole package and it...

you may

also like

Dodge Ram 1500 and 1500 Classic

3rd Gen Dodge Ram Front Winch Bumper Kit

NZD$ 1,108.73

see more

Dodge Ram 2500/3500

3rd Gen Dodge Ram High Clearance Rear Bumper Kit

NZD$ 1,047.04

see more

Universal Products

Swing Out Carrier Systems

NZD$ 846.96

see more

Dodge Ram 1500 and 1500 Classic

3rd Gen Dodge Ram Front Winch Bumper Kit

NZD$ 1,108.73

see more

Dodge Ram 2500/3500

3rd Gen Dodge Ram High Clearance Rear Bumper Kit

NZD$ 1,047.04

see more

Universal Products

Swing Out Carrier Systems

NZD$ 846.96

see more